Blade NanoQX Upgrades


Links to the important parts from this article:

When I first started learning about quadcopters and starting to fly them, there were two options that seemed the obvious choice for learning how to fly well. It was either buy a Hubsan X4 or a Blade NanoQX. Initially, I went the Hubsan route, but the Hubsan flight controller does not support “acro” mode of any kind, so you’re limited to only learning to fly in angle and advanced angle mode, which means that you can only ever hover around. No flips, no intense acrobatics, and no way to improve your acro piloting skills. A few months later, I had built my first 250 quadcopter, tried to fly acro LOS, and realized that I simply couldn’t do it. It’s HARD to fly acro mode LOS. As a result, I decided to purchase a RTF Blade Nano QX to learn how to fly better without risking damaging my 250 miniquad rig just to learn.

And learn I did! I spent hours learning how to fly my NanoQX. According to FlightLoggr I have over 5 hours of throttle time with the NanoQX, and I’m sure that’s a low estimate because I haven’t logged all of my flights with it (shameless plug for, a flight logging application that I’ve been working on for about a year). But, when I started to master it, and I started to get well into FPV flight with my miniquad, the toy-grade Hubsan and NanoQX started to fall to the wayside and gather dust on the shelf.



After a while, when bad weather, rain, snow, or even dark got in the way, I would find that I still had a craving for FPV! So — what should I do? Build a quad that my wife will let me fly inside, where I can control the weather and the light. But — the NanoQX that I bought was not an FPV one, so I had to make it one myself!


The first thing that I got rid of was the frame. The stock frame that comes with the NanoQX does do a good job, but it’s very brittle and can break after repeated beatings. As a result, I decided to swap it out. Picnic quads is the one-stop-shop for all manner of micro quads that you could want, and I purchased my favorite frame: a little folding frame called NQXF. It’s a beautiful little carbon fiber frame that comes with everything you could need. My only suggestion that they don’t mention on their site is that you should add a bit of epoxy or hot glue to the arm mounts on the end, because they were prone to falling off, even after I was able to wedge them on good and tight. Here are some pictures of how the quadcopter looks now:

This is the copter all folded up. Not particularly useful feature on such a small quad, but it helps protect everything.
This is the copter all folded up. Not particularly useful feature on such a small quad, but it helps protect everything.


This is the full frame, all built up.
This is the full frame, all built up.


Profile View.
Profile View.

FPV System

The FPV system that I chose to use was the VA1100 VTX/Camera combo that is sold by Blade. It has recently been marked down by 25% from $100 USD to $75 USD, but it’s still spendy. I actually bought the FPV Vapor, a crappy little 3 channel plane that they sell for $60 USD when it was on sale, and that was an amazing deal. Is it worth $75 USD? I’m not totally sure that it is. However, it’s a no-nonsense way to get into micro FPV that isn’t fiddly at all. All I had to do to set it up was solder the power lines from the VTX/Camera into the same place that the battery plugs in to the flight controller, and that was that. No messing around. Just solder it in, plug in the battery, and you’re good to go.

The only thing that I don’t like about this VA1100 system is that the antenna is very fragile, as I’m sure you’ve read elsewhere. And, especially with this frame, it’s mounted waaaaaay above the frame so it will often take a pretty big hit. That being said, when one of the arms of the antenna have broken and popped out of the solder joint at the top of the antenna, it’s been a fairly simple process to just solder it all back together.

For viewing, I will either (1) hook my VRX up to my HDTV in the basement, using a VAS Helical Antenna to beam through the rest of the house:

OR I will (2) use my DIY hobby king ghetto goggles. You can see a post ALL about my goggles setup over here.

DIY Hobby King Quanaum Ghetto Goggles
DIY Hobby King Quanaum Ghetto Goggles


Upgraded Motors

The next step in my master plan was to upgrade the motors. To find micro motors, there’s only one place to turn. Micro Motor Warehouse. Benedikt over there just has the greatest customer service and amazing products. The CL-0615-14 “Fast” motors are upgraded motors for the NanoQX that you simply have to plug in in replacement of the stock ones that come with the nano QX. In my guesstimates, they doubled the power output of the quadcopter overall, and allowed me to carry the FPV pacakge with relative ease. Micro Motor Warehouse has a lot of cautions about using them, including installation instructions and the fact that they don’t like to work well with horizon and angle mode on the NanoQX (starts to get a little bit jittery), but in my experience these cautions have been overstated. It just flies great with them.


Once again, credit to Micro Motor Warehouse for having the best products available for this. They stock the batteries, which are regarded by the community as the best micro motor batteries available. They make some with the form factor and weight to fit the NanoQX. These 25-50C 205mah 1S batteries are absolutely crazy. I can get between 3-5 minutes of very aggressive flight on them, even with the added extra weight from a bigger battery, compared to the stock nano QX battery. I never even pull out my original NanoQX batteries any more because they just can’t compare to the raw power that these batteries provide. Batteries Batteries



Now, getting to some of the jucier parts of this article: the radio. Now — I don’t use the stock radio. It just doesn’t work very well for Acro — fpv or otherwise. The acro mode on the NanoQX controller is fiddly and awful. It’s SUUPER fidgity and almost impossible to fly. Even with all my practice over a year of flying different kinds of copters in acro, I can still barely fly this. To overcome the problems, I use “curves” on the Taranis to help “tune” the quad to the way that I would like it to fly, if that makes any sense. Since it’s not a cleanflight/baseflight-based quadcopter, you can’t just hook it up to your computer and change the expo or PID settings (unfortunately). Over the winter, I’m going to be building myself a micro copter using Beef’s Brushed Board to learn a little bit about the fun that could be had with micro-cleanflight. Until then, I’m doing everything I can to manage the wonkiness of the NanoQX FC. I have detailed out my steps below to set up the Taranis, and I’ve also included the the eeprom file for anyone that would like to download it and check it out.  ( I bought the Orange DSM2 module from hobby king to allow me to connect to the NanoQX. )

FRSky Taranis and Orange Module for DSM2.
FRSky Taranis and Orange Module for DSM2.


Blade NanoQX + Taranis + Orange Module Setup

Download the .eepe file here.

What it comes down to:

  • Aileron on Channel 1 and apply to it curve 1
  • Throttle on Channel 2 and no curve (we can leave it linear because throttle is fine to be that way. I MIGHT consider putting a curve to flatten it out in the middle a little bit, but it’s not necessary with this thing)
  • Elevator on Channel 3 and apply to it curve 1 (same curve for elevator and aileron works well for me, but maybe you want it to be a little bit different?
  • Rudder on Channel 4 no curve
  • Skip channel 5
  • Flight Mode Switch on Channel 6 (I use the momentary switch on the Taranis, because it’s a binary function in the Nano QX flight controller — it’s either one or the other, and it just toggles when it gets the signal — it doesn’t “remember” which was the signal for acro or horizon)

The curve looks something like this:

Screen Shot 2015-10-06 at 11.24.25 PM


You want 7 points on the curve, the furthest to the left starting with:

  • -100
  • -40
  • -20
  • 0
  • 20
  • 40
  • 100

You can see how this adds a nice expo to the curve so that it’s more intense at the extremes i.e. for rolls, and more docile towards the center. You can play around with this curve to suit your style, and make it even better for you. If you have any questions about the setup process, please don’t hesitate to ask. If anyone does, I’ll go through and make a video to help demo it out and make it easier to get it all set up.


How does it fly now?

Well. It’s 1000% better to fly. It still isn’t perfect, and I don’t think that it will ever be perfect without the ability to get in and change the settings on the board like in cleanflight. But, with these modifications, and setting up the Taranis like I have, I have made it very fun to fly. I can zip around corners, do barrel rolls and flips, and I can can have really fun flights wherever I want without worrying about accidentally hitting someone or something with my big 250 miniquad. It’s still a lot of gear to carry around, but it’s a lot of fun to fly! Here’s some DVR footage I took while out flying this rig!

If you like it, please give me a subscribe on YouTube and check out my other stuff!

Glamor Shots

outside close up

outside further back

outside on pole

outside profile

outside sittin

What NanoQX modifications have you done? Post a picture of your NanoQX! I’d love to see it in action!

27 thoughts on “Blade NanoQX Upgrades

  • October 12, 2015 at 1:12 pm

    Community Build #1, from

    • Frame: Carbon H Micro 135mm
    • FC: Beef Brushed Board
    • Rx: MicroFRX
    • FPV: VA1100 Camera and vTx
    • Motors: MMW 0820-15 [also run MRSS 0815-17]
    • Props: Parrot [also Walkera Bullnose sometimes]


    • PID Controller 3 [multiwii 2.3 latest]
    • Roll/Pitch Rate 0.6
    • Yaw Rate 0.8
    • Throttle Mid 0.66
    • Throttle Expo 0
    • RC Rate 1.00
    • RC Expo 0.5
    • RC Yaw Expo 0.69
    • PIDs are suggest defaults from Beef Brushed Board Manual

    • May 11, 2016 at 11:37 am

      You inspired me to do the same build! Flies great, but if you use nano qx 3D props it yields almost double the power compared to the original! It becomes an Acro beast!

      • June 24, 2016 at 4:36 am

        Was totally stuck until I read this, now back up and runginn.

      • July 8, 2016 at 10:31 am

        Wow! What a wonderful, wonderful event. It does the heart such good to see the “heroic love”, as you so aptly describe it. Cheers and congrats to the new family!

      • July 20, 2016 at 10:28 am

        Understanding Your Life Purpose “Your life purpose is not to be an accountant, a writer, a coach, or an airline pilot.  No. Those are mediums with which you can express your life purpose.  Your life purpose is more about who you are at your core and what you are here to learn and give than it is about what you do for a living.”

      • February 5, 2017 at 1:27 pm

        Webrazzi’nin bu tavırları insanı canından bezdirdi. En azından ÅŸurada bizi adam yerine koyup ÅŸu konuyla ilgili bir iki kelam ediyorsunuz. Bundan sonra bu site uÄŸrak yerim olacak. EÄŸer sosyal medya sitesi olduÄŸunu iddia ediyorsa bir site bunu göstermeli Tr’nin en büyük sözlüğünde yaÅŸanan deprem etkisini es geçmemeli. Sizleri bu açıdan kutluyorum. Evet hatalı olduÄŸunuz taraflar vardır ama ben de hataları olgunlukla çıkarabilen insanlar olduÄŸu intibası çıktı sizlerle ilgili. Yolunuz açıl olsun

      • April 23, 2017 at 2:57 pm

        Dear Bob Ingle,Are you sure your email address on the sopranostate website is correct? I tried emailing you twice with it and both times my patriot media cable email rejected it at the server. Maybe the patriot media people are just corzine party hacks?

  • October 13, 2015 at 2:15 pm

    Great information. I need more time to digest. I do think i try to convert mine this winter.

    • October 13, 2015 at 3:19 pm

      I know it’s a lot to ask, but when you do your modifications, you should come back and post some pictures of your quad!

  • October 26, 2015 at 12:35 am

    Paul, the link that you posted to a Hobby King website is for Futaba compatible Orange module. I ordered a wrong one and it will not fit my Taranis. How frustrating! Could you please post exact one that you got because there are at least few options for JR style radios. Thanks

  • October 26, 2015 at 2:57 pm

    Love this post. Saving it for reference.

    I recently bought a Nano QX FPV and love it to bits. I am using it with a ground station that I built using a Bosscam RC832 reciever. Yesterday I replaced the stock antenae with VAS 5.8GHz 9.5dbic 5 turn Helical Antenna Soft Feed RHCP (old stock) that I got at a discount ($9).

    However my range has been dissapointing. I lose video pretty much as soon as the quad moves to the second floor. Outdoors, I lose it at around 20 ft. I don’t know what I am doing wrong.

    • October 26, 2015 at 3:08 pm

      I’m glad you liked the post! I appreciate your comment!

      The range SHOULD be more than that for sure. When I run a similar setup, I am able to fly all the way throughout my house without too much trouble, and I can get at least a soccer fields’ distance away without too much visibility hinderances.

      Are you 100% sure you’re on the proper channel? Sometimes you can see some bleed over from another channel, but see just enough. The symptoms would be consistent with that. Maybe try a different band or channel to see if it’s right. IIRC, you want to be on Frequency 4 (the first number would be 4) and then the channel would be whatever channel your VA1100 is on.

      See fatshark frequencies here:
      Receiver frequencies:

      • October 26, 2015 at 3:25 pm

        Thank you for the detailed reply. I think the Frequency could be the problem. I am not too sure what I am on but my Rx display shows 22, so I am guessing on FR2 and should be on FR4?

        • October 26, 2015 at 3:30 pm

          That’s my guess.

          FR2 == 5754
          Fatshark Frequencies have 5760 as a possible frequency and that IS their second frequency. So rather than listening to 5760, you’re listening to 5745, which would mean that you are a few Mhz off. Since it’s such a low-power transmitter, it could explain why you’re missing it.

          FR4 – Chanel 2 (42) would be the Fatshark Freqency.

          I dunno — but this sounds like it could be it!

  • October 26, 2015 at 4:38 pm

    What are you using as your DVR?

    • October 26, 2015 at 4:40 pm

      Ah I’ve been meaning to make a post about this. Maybe this week I can do that finally as this is a good motivator. I need to do some more flying with the DVR to get some more footage.

      It’s basically a capture card I bought off amazon (much like an Easy Cap) and a second VRX.

      • October 26, 2015 at 4:49 pm

        Thank you. I am very interested in knowing what your setup is like. The Nano QX flight vid looks pretty good.

        • October 26, 2015 at 4:51 pm

          I’ll let you know when I post it!

          I really should set up some sort of email subscribe button or something.

  • November 19, 2015 at 8:03 pm

    Paul just wondering what the white spacers you used on your frame and where did you get the bolts for them ? Thanks Gary

  • March 20, 2016 at 10:12 pm

    Is your Taranis file for OpenTX or for FrSky stock?
    I have the Taranis+ and a Spektrum DM9 module. The OrangeRX module I had didn’t work. The DM9 works like a champ and the antenna design is nice. It cost a lot more but it works and my OrangeRX didn’t.
    I am almost at a point that I would call “success” with the Taranis and my QX. I can fly and have fun but I have a constant yaw to the right that I have to fight. I have this issue with all my QX quads and I don’t have the issue with my older Spektrum DX6i. Bit frustrating!
    I am going to try out some curves this evening. I am still learning my Taranis!


Leave a Reply to Cancel reply

Your email address will not be published. Required fields are marked *