The Green Machine 3.0

See the Green Machine in Action:

Parts List:

Update: Added some pictures






Update 2: I’ve done away with the top hat, and the GoProtector, because when it broke, it actually broke my SimplePDB in half, so now I’m flying a stock ZMR:


3 thoughts on “The Green Machine 3.0

  • November 6, 2015 at 12:00 am

    Are the ESC’s sold individually? And are 4 required? As in, I’m going to build an exact replica of your “green machine 3.0” will the ESC’s total ~$17, or more like ~$68? Also, what do you mean by “Wire Harness”? Is something that is purchased, or is it homemade? And do you have any more specs on said “Wire Harness”?
    I’m trying to build my first FPV quad, and I figured I would start with one that works well for someone else, before I modify it to my own liking.
    Any other advice would also be greatly appreciated!

    Phil R.

    • November 6, 2015 at 9:15 am

      ESCs ARE sold individually.

      A minimum of 4 are required, though I recommend buying one extra in case one shows up bad or in case you break one. That way you don’t have to wait for a new one to show up. More like ~$68.

      “Wire harness” is just a fancy way of saying “I soldered wires together.” Instead of using a “power distribution board” I used wires that I soldered together. So it’s homemade. This would be a good example:×183.jpg

      Thanks for your interest! Let me know if you have any other questions!

      • November 6, 2015 at 10:29 am

        Ok, that looks fairly straight forward, and not too difficult. Thanks!


Leave a Reply

Your email address will not be published. Required fields are marked *